Right click on Windows 10 Start button and click on Control Panel.

Carefully remove the protective packaging such as foam rubber, corrugated paper, rubber bands, etc.

2. Here is a picture of a clock with the balance wheel wire stretched out (Narco clock). I replaced the mainspring. To slow down the clock, loosen the adjustment nut (turn it toward your left).

Moving the …

Any clock with a balance wheel is easily identifiable as, unlike the rest below, they have no pendulum. Carriage clocks are like mechanical watches in that they have a balance wheel (platform) escapement and so will run in any position, even lying on the back seat of a car (they were designed for travelling so they can tolerate movement).

To regulate this movement, you carefully move the pronged part in the + or - direction to go faster or slower. ... To adjust the timekeeping of a clock you move the bob up or down depending on whether or not it is running slow or fast. Inwards for fast and outwards for slow. Hold the wheel and push the small adjustment “finger”. If the clock is running slow, turn the pendulum nut clockwise to increase the rate. On the top of this wheel is a three-pronged part which presses down on the wheel at the prong tips. The bob will settle lower, making the effective length of the pendulum longer. Fix Slow or Incorrect Windows Computer Clock. Balance wheel needs adjusting: Regulating for fast and slow consists of sliding the two-small weights attached to the center of the balance wheel. Balanced with the wheel … Hold the wheel and push the small adjustment "finger" (any one of the three will work, see Diagram 2). Instructions for Hermle Key Wound Movement W0130 with Hour and Half Hour Strike (Balance Wheel) 1) Unpack the clock. 2) Transportation securing device.

What to do when your Seiko is running exceptionally fast. Moving the finger toward your right will be faster and visa versa. Adjustment on the dial, if your clock has a small arbor protruding the dial near the “12” or the “6” or perhaps in the center of the dial, then use this method. The clock will run slower. Punch one off each opposite side of wheel. If the clock is running fast, turn the pendulum nut counterclockwise to decrease the rate. Mechanical clocks are inherently inaccurate and therefore cannot be compared to electronic clocks. Now turn the clock upside-down and try to balance the chain back on the wheel. 2. Setting the beat on a balance wheel is just as important as the beat on the pendulum units.